What's new
VORON Design

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members!

Question Ghosting after Input Shaper - Resonance Issue?

I need major help.

I upgraded my Trident with CANBUS and a number of other things and ran pressure advance and input shaper (via SHAPER_CALIBRATE) and I have noticed some major ghosting on my prints. It was suggested I run the axis independently for input shaper then look at the graphs. Well... X looks fine... Y is another issue. The issue on TOP of the graph, is I don't know what it means or how to fix it. Anyone care to help out?

shaper_calibrate_x.pngshaper_calibrate_y.png
 
I'm no expert on this, but I would start with checking every screw and make sure none are loose. Then I'd check all belt tensions.
 
Top