Inductive Probe stays triggered after being triggered once

[Nerp]

Printer Model

LDO Voron 2.4 R2 350

Extruder Type

Clockwork 2

Cooling Type

Stealthburner

hey I recently finished building my LDO voron and when I start the Machine and check the probe it states it is Open, However whenever the Probe gets triggered once either through Gantry squaring or standard Probe test it just stays triggered.

I have tried checking the probe and making sure there is no Metal shavings on it or metal near it, I have checked the connector multiple times with no sign of change.

Any help or ideas would be greatly appriciated.