Question on 48v PS

[dafinch]

So my Fysetc Spider died and I'm replacing it with an LDO Leviathan. I've got the stock mean well LRS-200-24 but want to take advantage of the 48v drivers for AB motors? My AB Motors are Stepper Online 17HS19-2004S1 rated at 2amp max, Configured for 1.2 amp. What size PS would I need to cover just these two motors? Would an LRS-100-48 at 2.3 amps work?

Thanks in Advance,
DaFinch

 

[NoGuru]

I don't think you will have enough overhead with that PSU. I think this is what most people run https://www.fabreeko.com/collection...al/products/mean-well-uhp-350-48-power-supply
I use this one since I had it on hand https://www.fabreeko.com/collections/wiring-and-electrical/products/well-lrs-350-48-power-supply

 

[dafinch]

Thanks for the feedback. That's what I was afraid of. I think I'll need to look at using two uhp supplies, 1 24v and 1 48v,

 

[NoGuru]

Thanks for the feedback. That's what I was afraid of. I think I'll need to look at using two uhp supplies, 1 24v and 1 48v,

Yeah having two UHP's is much easier since space is at a premium.