Tap triggered in Klipper with Canbus

[rsforester]

I am upgrading my 2.4 with canbus. I am useing the BTT EBB 2209 Can board, BTT Manta M8P control board and the Chaotic Labs v2.0 CNC tap. I had tap working before switching to canbus but not scince. In klipper it stays in a constatnt state of triggered but the lights on the tap do respond as they should with movement. I attached the log file and both my can and printer cfg files. Any help would be appreciated.

 

[Mac]

I think you are referencing the wrong pin in the probe section should be like ( pin: ^EBBCan: PD?? ) you need to reference the Can-board