What's new
VORON Design

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members!

Tap triggered in Klipper with Canbus


New member
I am upgrading my 2.4 with canbus. I am useing the BTT EBB 2209 Can board, BTT Manta M8P control board and the Chaotic Labs v2.0 CNC tap. I had tap working before switching to canbus but not scince. In klipper it stays in a constatnt state of triggered but the lights on the tap do respond as they should with movement. I attached the log file and both my can and printer cfg files. Any help would be appreciated.


  • config-20231101-172811.zip
    1.2 KB · Views: 8
  • config-20231101-172754.zip
    5.7 KB · Views: 5
  • logs-20231101-172700.zip
    181.5 KB · Views: 0