What's new
VORON Design

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members!

Trident bulding


New member
Hi, I just started building a Trident 250mm (no kit).
Why does the aluminum Z extrusion (center rear) have an inward offset of almost 4 mm?
It should be. I'm assuming by "the z axis" you mean the center back vertical piece. That offset is accounted for in these printed parts.


  • SmartSelect_20240309_100455_Adobe Acrobat.jpg
    SmartSelect_20240309_100455_Adobe Acrobat.jpg
    219.8 KB · Views: 1
The printed parts attach the rear z extrusion at the proper offset to belt clearance. That's why those parts have that weird asymmetrical shape.