What's new
VORON Design

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members!

Voron 2.4 350 Self source build

HK416

New member
Hi all,

While I’m collecting the parts for the 2.4 350 build I came across some availability issues. For a starter the main PSU. The BOM suggests the MW LRS-200-24 but (I’m in Europe) I can’t seem to be able to find it anywhere.
Would the MW RSP-200-24 be a suitable option?


Also anyone has experience with the biqu.equipment website?


Another one would be the heated bed. Any experience with the below:


Thank you, Martin
 
You can use whatever power supply you have access to, as long as it supplies the necessary power. You will only need to take care of how to attach it on your printer, since it'll most likely not have the same hole pattern.

Biqu is a reputable seller/manufacturer. I already bought from them, both from their official site and from their store on Aliexpress.

As for bed heater I'd go with a Keenovo one, which is a reputable brand: https://keenovo.store/collections/c...-fermio-style-build-plate-heatbed-heating-mat
 
Top