Recent content by pdb6251

Sorry, I posted it before completing... Fils are available via the following link... https://www.thingiverse.com/thing:6487639 Also, check out the video to get a better understanding.

I recently completed a pretty comprehensive exhaust system and have posted it on Thingiverse. It includes a quick-release head that connects to the 6060 exhaust fan and can be operated with one hand. It can rotate after being connected so it allows you to remove tension from the exhaust lines...

Also, if you have not implemented it yet, look up the adaptive purge and adaptive bed mesh. They are awesome and I had no difficulty implementing them with Tap. https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging But maybe wait until you have everything else working first. :)

If you are saving the nozzle temp from Cura (or whatever you use) then just add... M109 S{EXTRUDER_TEMP} To restore the original nozzle temperature after your QGL. But if you are not saving your extruder temperature from Cura then let me know and...

I am not sure. But as long as the chain is not wider than the aluminum extrusion, I think you would be ok.

Having built 2 Voron 2.4's with the same issue I guess someone else might have it too.... On both of my V2.4's the xy joint cable bridge touches/rubs on the y-axis drag chain. I assume the generic drag chain I am using is maybe slightly larger than the original spec. But regardless if anyone...

For anyone else who runs into this issue.... The solution was exactly as outlined in the klipperscreen docs: https://klipperscreen.readthedocs.io/en/latest/Troubleshooting/#touch-not-working-on-debian-bullseye SSH to your pi Then "sudo nano /boot/config.txt" edit the line...

Thanks, I just saw this after pressing enter on my last update after swapping back. Both machines are running prints at the moment so will test your other suggestions after they are finished printing. Thank you for your suggestions and help.

ok, I swapped them back and still neither touch screen works. And, the M117 messages do not get to the Safari based Mainsail. Otherwise all seems to be ok and both machines are operating well. I speculate that they were not running the identical firmware as I did not think to read the exact...

Great idea , thank you. I swapped the SD cards and now neither of the touchscreens work. Haha. You have to laugh. But any information is good information when trouble shooting. Interestingly they both showed some new software updates which I did hoping that would possibly help. But may have...

I have 2 Voron 2.4's with essentially identical hardware and software. The BTT PITFT50 touchscreen stopped responding on one of them about a week ago or so. But the other one is working fine. I redid the firmware on RPI 4B, which did not solve the issue. I swapped out the LCD with another BTT...

Haha, things we can all relate to…. I learned never turn it over. Only turn it on it side. I mean I learned the hard way…. A couple times. i am a slow stubborn learner. Haha.

It is looking fantastic. I am only printing with eSum ABS+ at the moment and it is printing beautifully. I am rushing to print the parts to build the Stealthburner and Tap for my other V2.4. And, they are printing possibly as well as I have ever printed anything. I guess everyone in the 3d...

Sorry, I replied yesterday to say thank you but realize now I did not reply to your post so you may not have received it... so thank you. I really appreciate you taking the time to pass this along to me. Super helpful.

Thank you. Yes, I understood that part but I thought it should/would restore the original print temperature afterwards so that the print could continue. I realize now it does not and I have to implement that myself. ...I am doing lots of learning. But the great news is, the new V2.4 with...