Recent content by porcomaster

update: 15 of april of 2024, a few more joints fixed, this fix are about the size of the gantry profiles, as they do have some work around on then i put up to 6 mm more or less. but you should not change more than 3 mm. if you do want to change change on gantry_x_front, gantry_x_back or gantry_y...

Update: on the project file, i updated the build volume that was not quite right, and split into build_volume and build_offset, build volume will reflect exactly what is the size of the build volume, if you want the nozzle to be able to go outside bed for any reason whatsoever you should add...

Hey dave32, i really appreciate your response, on the casters, the caster i have in hand are dual lock, i can send you a picture if you are interested, it does lock wheels and swiveling at same time, however i will need to check if it does lock entirely at 0 degrees, or it does have a small...

thank you for answering, and yeah i agree with you, it's fucking amazing for most furnitures, that is the objective really, my friend bough several 3 meter bar, and decided to do machines and stuff, and i help him ocasionally, that is why i gained some bars for myself. the caster we have does...

my friend is one of the 100 early birds on the orangestorm giga, so we will receive a 1000x1000x1000 printer capable, hopefully until the end of april. and in the end what i really want to achieve is speed, while i would love to have a voron capable machine of 500mmˆ3, there is not enough...

Hey man first of all thanks for answering i will answer your question separately >Can you explain your motivation behind doing this as the tower? i think this is the one hardest to answer, at first i want to re utilize the 4040 profiles that i have, i gave up on that decided to do an enclosure...

hey man, i just released a project that will use 4040 profiles. take a look, and see if this works for you, it's not tested as i just released it and i will build it over the next few months. keep in mind that my 4040 profile might be different from yours, i think mine is 10series. my idea was...

Hello guys, i have 4040 profiles with me and i always wanted to build a voron, after so much discussion, and so many people telling me, that it would be feasible, possible or to hard, i just decided to do this whole project on fusion 360, before going to the real life project, and i finally...

https://file.io/LsDuN7cgNY0a this is the only way i found to upload the file 0.o

hello guys, crazy guy here again. i did a parametric project of voron 2.4r2, for now just the frame and everything needed to change the profile from 2020 to 4040. first the parametric common commands, there is a modifier, if you put 3, it's exactly as voron manual asks for, 1 and 2 changes...

Yeah, I always looked up for my father on thought question, even being past 30 haha, and he said the exact same thing. I really appreciate your advice, I almost went to revo hemera xs instead of stealthburner, but there is not much comparison between the 2 on internet, and being sincere...

I made the calculation, it's actually cheaper. I don't have right now with me, as it's in a document at my PC. But it was something like one nozzle voron kit + one nozzle high flow kit = +- 197 dollars. It would mean full kit, with extension cables, an extra heater core and maybe an assembly...

TLDR: Would it be the same if I buy from E3D a full revo kit + high flow kit, or should I just buy a high flow kit + heatsink + nozzle? Hello guys, my hero me, Gen 5 is falling apart. My mistake was that i made it in Petg, and my thermistor just broke, so i am using this opportunity to upgrade...

I am still unsure, i was happy when i found about revo creality, because I could use my old plates, but using a thermistor that is not the best in market makes me a little aware, i have klipper and mainsail on my printer, that means that i dont need to use thermistor designed for creality. For...

Thank you for answering me, I really appreciate it. What is the advantage of revo micro over other options?