Hood RIver Reaver
New member
Configurator Produces the Same BOM regardless of options chosen.
VORON Design
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members!
Configurator Produces the Same BOM regardless of options chosen.
- Thread starter Hood RIver Reaver
- Start date
Which configurator?
Hood RIver Reaver
New member
Hood RIver Reaver
New member
I know where the button is on the website. But you could be looking at the v0, the trident, the 2.4... (looks like the 2.4 from your screenshot)
I'm afraid i can't duplicate your results though. just as a quick and dirty test, I generated a 250mm bom and a 350, and checked the linear rail length. seems to be working as intended....
Hood RIver Reaver
New member
when I download the BOM its exactly the same.
I downloaded different configurations to spreadsheets and they are exactly the same BOM.
What are the part numbers for the extrusions? They will look very similar to each other. The rest of the BOM shouldn't change from a size change.
I should clarify that the *sourcing guide* is not a BOM, and should not be confused with a BOM. It's just a guide to finding all the things you might need. The other "download" button there *should* give you a file of your BOM, and it should have differences.... lets see...
I did that, and looked at the build plate section, down at the very bottom. Once again, I cannot match your results. Mine clearly shows a 10" build plate for the 250, and a 14" build plate for the 350, just like it should
I did that, and looked at the build plate section, down at the very bottom. Once again, I cannot match your results. Mine clearly shows a 10" build plate for the 250, and a 14" build plate for the 350, just like it should