I came across a situation the other day where I was able to start a print but with the probe still attached & the system didn’t perform a state check.
This was due to a probing error during the QGL process & the way Klicky deals with it & combined with using a conditional homing command in the Print_Start macro.
I posted the issue on the Klicky GitHub as well as a workaround macro that stops this specific series of events causing this issue.
github.com
This was due to a probing error during the QGL process & the way Klicky deals with it & combined with using a conditional homing command in the Print_Start macro.
I posted the issue on the Klicky GitHub as well as a workaround macro that stops this specific series of events causing this issue.
Certain Events & Probing Error Leaves Potential For Starting Next Print With Probe Still Attached & Unchecked · Issue #230 · jlas1/Klicky-Probe
If the user encounters a "probe triggered prior to movement" error during probing like if there's a poor connection with the magnets due to say a buildup of old filament candy floss, or a failing p...