VORON Design
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members!
Nevermore and MRW Kinematic Bed Mount
- Thread starter Yezariael
- Start date
azoner
New member
I rotated everything 180 degrees, putting the bar and center magnet at the rear which leaves the front free for the nevermore.
https://github.com/azoner/VoronUsers/tree/master/printer_mods/azoner/MRW_Kinematic_Sexbolt_Mount
https://github.com/azoner/VoronUsers/tree/master/printer_mods/azoner/MRW_Kinematic_Sexbolt_Mount
Yezariael
Well-known member
That's a possibility but I would hate it to hide the beautiful bar at the back! On the plus side I would not have to tap a hole into the LDO heatbed.
I was thinking about doing it the other way, put the bar in front and nevermore to the back. No good Idea?
You might want to look into nevermore max
GitHub - nevermore3d/Nevermore_Max: WORK IN PROGRESS: Nevermore Max Air Filter
WORK IN PROGRESS: Nevermore Max Air Filter. Contribute to nevermore3d/Nevermore_Max development by creating an account on GitHub.
github.com
Yezariael
Well-known member
Thanks for the option, but this is not for me. My filament feeds from top.You might want to look into nevermore max
GitHub - nevermore3d/Nevermore_Max: WORK IN PROGRESS: Nevermore Max Air Filter
WORK IN PROGRESS: Nevermore Max Air Filter. Contribute to nevermore3d/Nevermore_Max development by creating an account on GitHub.
Fair enough, but why would feeding filament from the top pose a problem? Mine is also fed from the top due to ERCF
Yezariael
Well-known member
I thought Nevermore Max is mounted on the back? Can you pls show a photo of your setup? Thanks!
It is, that is exactly what would solve your problem and even though you can feed filament through the max, you can just ignore it and feed from the top.
Yezariael
Well-known member
Would be nice but sorry to say there is the next problem: The printer will sit in an network closet and there is not enough space at the back.It is, that is exactly what would solve your problem and even though you can feed filament through the max, you can just ignore it and feed from the top.
I am currently sourcing stuff for max and currently still use duo XL. Until Max is complete I have VEFACH in the exhaust filter housing and housing itself is a mod which doesn’t have a bowden coupler. Same can be done with max.
azoner
New member
If you mount the v5 duo toward the rear of the bed, you‘ll have interference issues with the z end stop and with the nozzle brush and bucket, if you use one. You could place the nevermore more in the center of the bed. You would just need to remove the bed to access the nevermore to replace filter media. Seems cumbersome.
Yezariael
Well-known member
Thanks! I think I will do it this way, seems to be the best if not only way for my case. Sometimes function has to follow form
Removing the bed is no problem with the MRW kinematics as it's only placed with some magnets.
azoner
New member
Thanks! I think I will do it this way, seems to be the best if not only way for my case. Sometimes function has to follow form
Removing the bed is no problem with the MRW kinematics as it's only placed with some magnets.
Post a picture when you get it running.
Yezariael
Well-known member
Will do! Can take some time because I have first to order some parts and then tap the new hole in the LDO heatbed - besides of that I have a job, wife and family
Similar threads
Solved
Unable to home Z
