What's new
VORON Design

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members!

Sensorless Homing with Octopus 1.1

Thanks, I could manage it to work. The jumpers are a must but not stealthchop mode. Configuration can be found in the Voron docs.
 
Yep, and don't forget to tune them for sensitivity. I was using Klicky, and the dock kept being off by a little. I ended up re-tuning the sensorless homing it if fixed this issue.
 
Yep, and don't forget to tune them for sensitivity. I was using Klicky, and the dock kept being off by a little. I ended up re-tuning the sensorless homing it if fixed this issue.
I use 100 - with 75 it crashes a bit into the frame and with 125 it does not home. Accuracy is not so much a problem because I use Tap.
 
Hi there,
Does anybody have a good documentation how to configure Klipper for sensorless homing with Octopus 1.1? Or an example configuration for me to look up?
And is it a must to place jumpers like in this example: https://teamgloomy.github.io/btt_octopus_1.1_f429_sensorless.html#driver-diag-pin?

Thanks!
Here is the documentation from the Voron Crew. It's pretty solid. (OMG. I forgot to put the URL in the first time! Lol!) https://docs.vorondesign.com/community/howto/clee/sensorless_xy_homing.html
 
Last edited:
Top