p40whk
New member
Couple questions;
After troubleshooting non working tool head fans, I found that the 2 piece Hartk PCB isn't making deep enough contact with it's mating PCB and this is due to the way my Stealthburner was printed (I've tried multiple PCBs and tried shimming the fan PCB out), would I be better off going with one piece PCB or having the stealthburner reprinted?
After troubleshooting non working tool head fans, I found that the 2 piece Hartk PCB isn't making deep enough contact with it's mating PCB and this is due to the way my Stealthburner was printed (I've tried multiple PCBs and tried shimming the fan PCB out), would I be better off going with one piece PCB or having the stealthburner reprinted?