Voron Stealthburner with Revo6 Hotend Mounted to a Ender 5 Pro converted to a Mercury1.1

[Diy Reno Guy]

I am just getting started in 3D printing and require a little help.
I have an Ender 5 Pro that i am changing the xy axis to a Mercury 1.1
I want to Mount a Voron Stealthburner to it with a clockwork 2 and a revo six hotend, and bl touch.
It will be mounted to a MGN12H linear rail.
I am looking for build files , brackets and mods for this print head setup.
I cant seem to find much.
Any help would be appreciated....Thanks

 

[vinnycordeiro]

VORON Stealthburner and Clockwork2 can be found on the official VORON Github repository, as everything else: https://github.com/VoronDesign/Voron-Stealthburner. If you are not comfortable with Github you can use this site to pick the files you need to print: https://stealthburner.wizards-enclave.net/.

That being said, you will need to either design a mod or find one already made to add a BLTouch to it, this probe isn't supported by the VORON Design team because it tends to fail at the usual chamber temperatures a VORON can reach. The CAD model is available on the Github repo if you want to do that yourself.

Good luck converting your Ender 5!