What's new
VORON Design

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members!

Fysetc SB CAN Toolhead with Chaoticlab CNC Tap

cryoplay

New member
Hi there.

Im Building my Voron 2.4 R2 with Aluminium Parts and now im struggling with the Toolhead PCB.
Im not sure how to wire the Tap Sensor from Chaoticlab becaus in the Manual must be de Tap Sensor
connected to 5V. But i have only 24V or 3.3V Connectors.

Does anybody have some suggestions?

I use the Fysetc all Aluminium Voron 2.4 R2 Set with the Spider 2.2 Board.
 
From what I can see the can board is 5v. So just attach it to a port.
I did that with a sb2040 on GPIO28 port.
 
Top