If you had to build another Voron?

[5twenty]

Maybe look into RatRig or VzBot? Voron isn't the only game in town, and there are some really smart folks making some really smart stuff out there...not always in here!

Not trying to throw fuel on the fire, but while you are burning I thought I'd show you some other sources of flame.

And don't negate ADDING to what you have...tap-/stealth-changer, MMU, heated chamber for more engineering materials, belted bed to remove prints when done...etc, tons of mods out there to make it a completely new printer.

 

[3dCase]

My brother has a ratrig V3 for little over 2 years now. He spent at least the same amount again to improve things. His opinion now is that if he had known then what he knows now he would buy a VZbot or Voron and not a ratrig.
He is by no means saying they are bad, just not in the same league as Voron or VZbot.

 

[MichaelOToole]

Snapmaker U1 looks interesting and a very good price?

 

[3dCase]

But admit it, you wanna build your own right?

 

[5twenty]

Looks like an X1-C and a Prusa XL had a child.

 

[tetra]

Don't!

I built my first 2.4 a couple years back. Now I have two 2.4s....and:
Two more 2.4s in boxes, a RatRig ready to put together, four VzBots (I already had 2 TronXYs), two more vzeroes to build, a Doron, and a Micron kit on the way.

But since that 2.4...I've also built a Switchwire, four MKS clones, three Vzeroes, LH Stinger, converted a couple cartesians to something better.

And that doesn't include all the pre-built printers I own.

It's a slippery slope...but if you have your indulgences in check you may be better off than I am. I go overboard when I find something I like to do.

fascinating. am I counting correctly when I venture the idea that you have 23+- printers in various stages of functioning!? wow. you're making me feel better about my compulsions!