Mod name | Description | Based on | Link to the mod |
Electronics compartment side covers | A cover to hide the sides of the electronics compartments. I combined the idea from Maple Leaf Makers for a side cover for the electronics compartment with the mid panel hex pattern from Zen3D to have a seamless look. |
- Modesty Mesh for Voron Zero by Maple Leaf Makers
- 0 MidPanel HexPattern by Zen3D
|
www.printables.com
|
Deck panel cover | A cover for the deck panel. It is placed on top of the normal deck panel and is purely aesthetic. |
- Voron V0.2 Z endstop combined with a lower guard to protect the area around the leadscrew by Jevermeister
- V0 MidPanel HexPattern by Zen3D
|
www.printables.com
|
Tophat led mounts | Led mount for led strips that lights the V0.2 from the top of the Tophat. |
- Matchstick Diffuser by Maple Leaf Makers
| not yet published |
Hex pattern top hat extender panels | Custom hex pattern panels for an extended tophat. | - |
www.printables.com
|
Electronics bay cover + umbilical guide | Custom electronics bay cover to route the bowden tube, toolhead umbilical and two led cables for the left and right led strips. | |
www.printables.com
|
Braided cable guides for 1515 extrusions | Guides for the braided led and fan cables to route the cables neatly. They are desiged based on the mount of the matchstick diffusor by Maple Leaf Makers |
- Matchstick Diffuser by Maple Leaf Makers
|
www.printables.com
|
Piggyback air filter mod | A Nevermore/MF Nano inspired air filter that is located in the back of the printer (electronics compartment) and draws air in through one side of the mid panel and pushes it back on the other side. The filter cartridge can be changed easily from the back of the printer. |
- MF Nano by Maple Leaf Makers
| not yet published |
Tall skirts mod | Taller skirts that are based on the V2.4 / Triden skirts. They allow the 4.3" touchscreen to be mounted in a compfortable position and allow for a vertical mount of the raspberry pi in the bottom electronics compartment. |
- Standard V0.2 R2 and V2.4R2 skirts
- 4.3" Touchscreen Mount by jeoje
| not yet published |
Bottom electronics compartment mod | Together with the tall skirts mod this mod adds a grid of m3 hex nuts to the bottom of the printer. On this grid the electronic components can be mounted flexibly. The mod includes mounts for the RaspberryPi, BTT U2C, BTT SKR Pico, Wagos and standoffs for custom cable management. | - | not yet publsihed |
Bottom panel mod for better air circulation | A more open bottom panel that allows for a better airflow. |
- Voron V0 Hinged Rear Panel Hex Mesh by Hr_Ravn
| not yet published |
Mini Stealth Burner bowden mod with BTT EBB36 mount | Modified Mini Stealth Burner bowden toolhead to attach a BTT EBB36 to it to use canbus with a bowden setup. |
- Standard V0.2 R2 Mini Stealth Burner bowden Version
| not yet published |
Upper rear panel with Voron logo | Printable upper rear panel with Voron logo. | - |
www.printables.com
|
Top hat corner cable guides | A cover that can be mounted into the corners of the top hat that hide the cables for the leds in the top hat. | - | not yet published |