jonhysfl
New member
Hello, folks!
First post here...
for 1,5 years i've been stacking some parts to build a voron 0.1, last week i got a hold on some nema 14 14HS5401-01N.
Here in Brazil, kits for voron usually are VERY inacessible for the poor maker (like me), and aliexpress now have a 98% fee on international items (item + shipping + tax), so I go to electronics junkyards sometimes and try to find some pieces .
Nema 17 here is readly available here, but, 14's are a hassle to obtain.
The stepper that i've got a hold on is this:
![thumbnail_image_67230209.jpg thumbnail_image_67230209.jpg](https://forum.vorondesign.com/data/attachments/4/4100-e0959f4b9b05b3bad1a996bfb7abfd94.jpg)
![thumbnail_image_67197953.jpg thumbnail_image_67197953.jpg](https://forum.vorondesign.com/data/attachments/4/4101-833ef53b581cdd66b6331a1b3d2d62cd.jpg)
![thumbnail_image_67203585.jpg thumbnail_image_67203585.jpg](https://forum.vorondesign.com/data/attachments/4/4102-45b0dbb85c428941091d456c258bd045.jpg)
I'm most concerned to the shaft lenght, just 10mm.
There's any way to use this stepper, or should i go to a full nema 17 with this mod:
www.printables.com
Thank for everyone that can help.
Cheers.
First post here...
for 1,5 years i've been stacking some parts to build a voron 0.1, last week i got a hold on some nema 14 14HS5401-01N.
Here in Brazil, kits for voron usually are VERY inacessible for the poor maker (like me), and aliexpress now have a 98% fee on international items (item + shipping + tax), so I go to electronics junkyards sometimes and try to find some pieces .
Nema 17 here is readly available here, but, 14's are a hassle to obtain.
The stepper that i've got a hold on is this:
![thumbnail_image_67230209.jpg thumbnail_image_67230209.jpg](https://forum.vorondesign.com/data/attachments/4/4100-e0959f4b9b05b3bad1a996bfb7abfd94.jpg)
![thumbnail_image_67197953.jpg thumbnail_image_67197953.jpg](https://forum.vorondesign.com/data/attachments/4/4101-833ef53b581cdd66b6331a1b3d2d62cd.jpg)
![thumbnail_image_67203585.jpg thumbnail_image_67203585.jpg](https://forum.vorondesign.com/data/attachments/4/4102-45b0dbb85c428941091d456c258bd045.jpg)
I'm most concerned to the shaft lenght, just 10mm.
There's any way to use this stepper, or should i go to a full nema 17 with this mod:
Printables
![www.printables.com](/proxy.php?image=https%3A%2F%2Fwww.printables.com%2Fassets%2Ffavicons%2Ffavicon-32x32.png&hash=2fe710f5bc20caa70e0a808cbde44231&return_error=1)
Thank for everyone that can help.
Cheers.