What's new
VORON Design

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members!

Starting from Scrap Outside Detroit

Hi all!

I’m super excited to be on this ride with everyone! I am working on a 350 from as much as I can around the house.

This will be my 3rd printer, following a Toybox my Kids got for Christmas which is where I caught the bug and an Anycubic Photon 4K.

I have had an Inventables X-Carve for a few years though, and it’s helping me along.

I’m super excited for this first mod I made today. I had a bunch of 80/20 laying around but with a 5.3mm gap and not the recommended 6mm.

As a way to counter that and ensure the rails are perfectly center I milled these t-slots from some scrap aluminum flat bar that line up perfectly with the rails and the extrusion!

432D427C-76E3-403E-9FEC-834AAD26FEBD.jpeg
1553685E-0332-48E6-90DE-6722546F59F4.jpeg
474BE6EA-946C-4F4F-95C8-75ECC661AFC5.jpeg
 
Top