Changing to xol

[Sail hatin]

Printer Model

2.4

Extruder Type

Clockwork 2

Cooling Type

Stealthburner

Hi all, I’m currently running a Voron 2.4 canbus. Manta m8p +cb1 to the 2209
I’m going to try my hand at an xol, orbiter 2 and revo voron tool head. It requires the ebb36 and I wanted to know how much of a pain it was to flash the 36. When I built my voron the flashing was like coming on to LSD for me. Weird stuff as I’m way more mechanical than digital. Has anyone done this recently or does anyone have any suggestions for this switch? Thanks a ton

 

[vinnycordeiro]

All things CAN bus can be understood by following Esoterical's guide. EBB36 has its own section.

 

[Sail hatin]

All things CAN bus can be understood by following Esoterical's guide. EBB36 has its own section.

Thanks a ton.

 

[HerrDirektor]

I currently have the same setup and I'm not satisfied with CW2 extrusion and SB cooling so Im thinking about doing the same. Curious to hear how it works out for you, while waiting for the shipment of all the mechanical parts

 

[Sail hatin]

I currently have the same setup and I'm not satisfied with CW2 extrusion and SB cooling so Im thinking about doing the same. Curious to hear how it works out for you, while waiting for the shipment of all the mechanical parts

I’ll keep you in the loop. I haven’t ordered anything yet as I’m still planning on exactly what I want to do. The xol and orbiter look nice and I just happen to have a revo voron hot end around The stealthburner is…fine, I just really want something that feels really solid. The tap seems off to me

 

[HerrDirektor]

I’ll keep you in the loop. I haven’t ordered anything yet as I’m still planning on exactly what I want to do. The xol and orbiter look nice and I just happen to have a revo voron hot end around The stealthburner is…fine, I just really want something that feels really solid. The tap seems off to me

My tap is working okay but I have problems with SB and CW2 when printing at faster speeds with the rapido HF. Currently I'm looking into XOL with Galileo2 and cartographer. Lets see what we will end up