- Printer Model
- Voron 2.4 350
- Extruder Type
- Clockwork 1
- Cooling Type
- Afterburner
While waiting the INDX I am looking to upgrade couple things + re-print/re-install anything necessary.
Now new parts are:
- Galileo 2 kit
- Nitehawk-36
- Bambu Lab X1C hotend
- new AB belts from Gates
- new fans for new hole print head.
I assume I need to get SB for Galileo + either create my own mix for Nitehawk-36 or find appropriate.
But what about A/B gantry parts? Any upgrades since 2021 or should I just re-print revision from 2021 that I have used to build my Voron...
I will be reprinting A/B at least as it was printed on bad printer years ago and quality is subpar.
What would be your recommendation?
Now new parts are:
- Galileo 2 kit
- Nitehawk-36
- Bambu Lab X1C hotend
- new AB belts from Gates
- new fans for new hole print head.
I assume I need to get SB for Galileo + either create my own mix for Nitehawk-36 or find appropriate.
But what about A/B gantry parts? Any upgrades since 2021 or should I just re-print revision from 2021 that I have used to build my Voron...
I will be reprinting A/B at least as it was printed on bad printer years ago and quality is subpar.
What would be your recommendation?
