X carriage mount rocking

[eviltoy]

Hi Guys

I recently upgraded to a MGN12, EBB36 and a Orbiter V2. It seems that I have some rocking of the carriage in the Y direction. I suspect this is due to the new belt clamping mechanism but I cannot say for sure. All screws are as tight as I can get them without breaking parts. Anyone had this issue before?

 

[NoGuru]

What part is rocking, the rail carriage, carriage mount, Steathburner? Try and pin point where the rock is.
Take it apart and redo it if you have to.

 

[eviltoy]

What part is rocking, the rail carriage, carriage mount, Steathburner? Try and pin point where the rock is.
Take it apart and redo it if you have to.

The carriage mount. I believe its the belt clamping that is causing it tbh

 

[NoGuru]

What I do it grab both belts with needle nose and twist them to tighten them and while doing that I cinch down the bolts on the carriage.
Keep trying at it because as you know, you don't want wiggle.
Also concentrate on racking the gantry while you are at it.

 

[eviltoy]

What I do it grab both belts with needle nose and twist them to tighten them and while doing that I cinch down the bolts on the carriage.
Keep trying at it because as you know, you don't want wiggle.
Also concentrate on racking the gantry while you are at it.

Will give that a shot. Gantry is perfectly deracked already its just the wiggle