Solved v2.4 finishing skirts, fans. Where is the fan support for the 300x300?

[Vae Victus]

I'm (finally 18 mos later) finishing the skirts, fans, filter, side panels, etc so I can print beyond PLA. I don't see the fan bracket STL for the sides fans for the 300x300. Is it the same one for the 350 model?

 

[thunderkeys]

yes, the fan support pieces are the same across all sizes.

This is the part for v2.4r2: https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/Skirts/side_fan_support_x2.STL