SIBOOR Voron 2.4r2, CNC metal build, with ERCF8v2

[Mogal]

Date of purchase: Nov 11, 2024.
What: SIBOOR Voron 2.4r2 350mm with metal CNC kit and ERCF8 v2.
Shipping: Approx 2 weeks (Expected: Nov 23rd)






This is my current printer. Number 3 of a DIY run of printers starting back in 2012. I've been happy with this printer, but it's time to move on. I wanted an IDEX, but the ERCF will do!
Cheers!

P.S. Not sure of my timeline to build, but expecting a couple months due to prior commitments.

 

[Mogal]

Couple of gotchas in the build so far but really liking this thing so far!

Problems are mostly with the Chaotic labs aluminum parts, but this is a parts kit from SIBOOR, so I'm dealing with them.
- Z drive build kit: Needed to grind a bit of the flange off the bearings they blocked the 3 securing screws from starting(No picture?!)
- I was shorted 4, F625 bearings - Still fighting with supplier on getting 4 more to complete the kit (And 2x 9mm bearings)
- Was given the wrong bearing size for the two XY Jointers. Manual states 9mm bearing, I received 10mm and they bind when securing.
- Z drive stepper belt tensioners can not be engaging properly. I can only tighten 1 out of the 4 as they are just too tight.

I'll admit I am now frustrated with support. Seems like no matter how I explain things, they are saying everything is correct. Err.
Although I did not get all the right parts from SIBOOR, with my stash of used parts from other builds, I've been able to get the printer mechanically built.


The build as it sits today


Supplied bearing is 10mm whereas the build requires 9mm.


Bearings bind when snugged up


I've used the spare idler and it all seems to work/align just fine.


10mm whereas I need 9mm.


I can not completely engage the belt tensioner as the belt gets too tight.


One only one of the four tensioners sit correctly with good tension on the belt.